Stainless steel fabrications
Find below a small selection of bespoke stainless steel fabrications, from hoppers and chutes to frames and sheet metal fabrications.
The stainless steel cone hopper above was fabricated in 2012 from 1.5mm rigged stainless steel, this was used to transfer produce from a multi head weigher to a bagging machine. This is 1.3 metres in diameter and 550mm high.
Stainless steel fabrications
The stainless steel fabrication above was manufactured for a client which specializes in water features. This unit has four individual water falls positioned at the top of the sheet panels, the water is pumped up from the base reservoir, this allows the water to cascade evenly down the wall over the letters.
This unit was fabricated in July 2013
Its 3.3metres tall & 7 metres long
The above stainless steel frames were fabricated from 80x80x5mm box section and finished to an extremely high polished specification.
These frames were manufactured a our premises in March Cambridgeshire in 2015
The stainless steel hopper above was manufactured in 2016. This is used to mix mayonnaise, this unit holds 400 litres
This was fabricated from 1.5mm this 316 grade stainless steel.
The top hat style stainless steel fabrication above was made for a steam vent cover, this was fabricated from 1.5mm DP1 sheet, this was made in 2015
The stainless steel fabrications above were manufactured from 1.6mm DP1 sheet this was made 2015
These types of stainless steel transfer hoppers are regularly used between multi-head weighing machines and vertical form fill bagging machines. This hopper is fabricated from stainless steel sheet metal and comprises of 3 laser cut parts, 1 the base flange C/W mounting holes, 2 the beveled rolled cylinder and 3 the oblique rolled cone. This hopper is used in an onion factory pack-house.
This stainless steel hopper is a little bit unusual, as it has a flat sided oval base flange, this was used for transferring lettuce leaves from a weighing conveyor into a bagging machine.
The hopper above was used to transfer carrots from a wieghing machine to a bagging machine.
The above stainless steel fabrication was used as a chute to transfer cherry’s from a weighing machine to a packaging machine.
- This was fabricated from 1.6mm DP1 stainless steel, in 2014
The stainless steel hopper above was used to transfer onions.
The above tables were used in a food production pack-house.
The two stainless steel fabrications above were made to have electrical control cabinets installed to them.
There was six in total manufactured in 2014
The above square to round stainless steel hopper was used as part of a drain system in a high care room in a food factory.
This was fabricated in 2014
This stainless steel fabrication (cabinet) was made to store machine parts in a high care area
- The size of this cabinet was 2.2m tall 1.8m wide and 800mm deep
- this stainless steel fabrication was built in 2010
The above stainless steel fabrication was built to house an electric blower which is used on one of our vegetable washing machines, this cover helps in reducing the noise and looks nicer than the blower unit!
- This fabrication was built in 2011
The stainless steel fabrication above was made to go into a water treatment works. This trough is 11 metres long when its assembled, it tappers down by 400mm from one end to the other.
This stainless steel fabrication was manufactured in 2014, this is the second unit we have fabricated of this style this year.
The above stainless steel fabrication was used in a water filtration plant, these chutes directed sludge and water to its correct path.
- These were manufactured in 2014
The above tables were fabricated from 40x40x2mm stainless steel box section. These were used to assist with packing fresh produce an a busy pack house.
The above stainless steel fabrication was used to store vertical form seal bag reels, this was fabricated in 2011
The above photo is a mixing tank lid we fabricated from 3mm and 5mm stainless steel, this was fabricated in 2011
The conveyor complete with bomb doors was fabricated from 2.5mm DP1 stainless steel sheet, this unit was fabricated in 2012
The above stainless steel pipework was part of a water cleaning system, which is fabricated within a 40 foot container, these units are built /assembled in our workshop then shipped direct to site with minimal installation.
The above rectangle to round stainless steel hopper was fabricated from 2mm DP1 sheet, this is used to transfer carrots from a multi-head weighing machine into a bagging machine.
This was fabricated in 2013.
The stainless steel fabrications above were manufactured to be used as part of a water treatment system, these were produced in 2015
The stainless steel trough above was used as a drip tray, this was fabricated from 3mm thick dull polished stainless steel, this was made 2015
The 4no. items above are used as part of a check weighing machine, these catch the rejected items. These were fabricated from 2mm dull polished stainless steel.
These were manufactured in 2015
For more information on stainless steel fabrications that we can offer please contact us