Conveyors

Below is a selection of the types of conveyors we are able to provide. These are completely bespoke to your requirements. We can also offer conveyor servicing, repairs and modifications.

The conveyors above were used to transfer potatoes from a bulker lorry to a grading system. this was built in 2019.

The machinery above were used to handle lettuces on a farm field rig, this system was built in 2019.

The machinery above were used to pack food pouches in to boxes, this was built in 2020.

machinery of this type, constructed of stainless steel, are often used in busy packaging warehouses. The gravity rollers are mounted from the side of the unit allowing the operatives to pick the product from the racking system located behind them & place the product(s) in a plastic tote bin positioned on the rollers. This would then be either moved along to the next packaging station or placed onto the centre conveyor to be transferred to the dispatch area of the warehouse.

• This conveyor is 13 meters long x 600mm wide
• This was built in 2009

These conveyor belts can be supplied in many different colours and options for example

• Side and centre tracking on the underside of the belt to prevent the conveyors belt from drifting into the conveyors side frame
• Different materials/types for example PVC, PU, rubber, mesh & pillow, finger cleat & bakery belting
• We can also offer an on site conveyors belt repairs and replacement service – please contact us for further details

The conveyor above was used to transfer limes between a bagging machine towards a metal detector.

• This conveyor was 2.2 meters long, it had a belt width of 300mm
• This unit had an electronic speed control unit attached to it.
• This was built in 2014

The conveyor above was used to assist with packaging oranges, the sheet metal profile was used to hold tray’s.

• This unit was 2.2 meters long, it had a belt width of 300mm
• This unit had an electronic speed control unit attached to it.
• This was built in 2014

The above stainless steel conveyor was used to put potato’s into a plastic do-lav,  the sensor control on the end of the unit would control the pivot point motor gearbox this allow the produce to have a softer drop whilst filling the do-lav.

This was built in 2013

The stainless steel conveyor above was used to transfer dates, from a de-stoning machine on towards a packaging table.

This conveyor was fabricated in 2013

The conveyor and mild steel tanks in the above photo were used as part of a water filtration unit.

These were fabricated in 2013

In the above picture we supplied 6 units from stainless steel 2.2metres long, these were fabricated in 2010.

The above was used to transfer leeks from a weighing machine then drop them into a bagging machine.

This was fabricated in 2009.

The above is used to feed leeks on to a leek washer cutter machine.

This was built in 2008.

The de-elevator above was used to assist lettuce leaf downwards towards a waste conveyor.

This was fabricated in 2008.

The above elevator was used to transfer waste cardboard away from a box making machine.

This was built in 2015

The 2 units in the above photo were used in part of a garlic production line.

This were fabricated in 2010

Our modular conveyors run through vegetable washer cutter systems. The flighted cleats on the belt have leeks positioned between them which are conveyed through a washing zone then on towards the cutting zone to be trimmed to size. There are many different variations & manufacturers of modular conveyors belting. Over the years we have used several different makes, but have found Intralox to be the best product for wear and tear & service for replacement parts.

This powered roller inspection table conveyor was used to sort oranges, it is inverter driven with a single phase power supply and is controlled by the sensor mounted on the front, which will be looking into the hopper it will be positioned behind. This machine runs at a low speed of 2 meters per minute.